CP Pistons Mazda DISI MZR 2.3L

$1,430.00

Piston Options

CP Pistons for DISI MZR 2.3L Engines

Available in:

Bore: 87.5mm (STD) / Comp: 8.5:1 - Part#: SC7534
Bore: 88mm (+0.5mm) / Comp: 8.5:1 - Part#: SC7535
Bore: 87.5mm (STD) / Comp: 9.0:1 - Part#: SC7536
Bore: 88mm (+0.5mm) / Comp: 9.0:1 - Part#: SC7537
Bore: 87.5mm (STD) / Comp: 9.5:1 - Part#: SC7538
Bore: 88mm (+0.5mm) / Comp: 9.5:1 - Part#: SC7539

These pistons DO NOT fit the OEM Rods.

STD bore size pistons are not recommended in a used bore for any performance engine unless the bores have done minimal work with minimal wear and the correct piston to bore clearance can be adhered to.

All piston manufacturers have a specific piston to bore clearance that they recommend. If STD bore pistons are requested and there is a piston to bore clearance issue we will not exchange or refund, due to the reasons given above.

Available options

Piston Options: Bore: 88mm (+0.5mm) / Comp: 8.5:1 - Part#: SC7535; Bore: 88mm (+0.5mm) / Comp: 9.0:1 - Part#: SC7537; Bore: 88mm (+0.5mm) / Comp: 9.5:1 - Part#: SC7539; Bore: 87.5mm (STD) / Comp: 8.5:1 - Part#: SC7534; Bore: 87.5mm (STD) / Comp: 9.0:1 - Part#: SC7536; Bore: 87.5mm (STD) / Comp: 9.5:1 - Part#: SC7538

Engine build fitment

2.3 L3 MZR. Match the selected dimensions, engine generation and rotating assembly specification before machining or assembly.

Installation and BBT workshop support

Confirm finished bore size, piston-to-wall clearance, compression height, pin specification, ring gaps and valve clearance against the supplied piston documentation.

Built by Boost & Tune is an authorised Spool Imports dealer and can assist with component selection, engine assembly and tuning requirements for your build.