Crow Cams Ford Barra 2002–2005 BA/early BF Standard Replacement Exhaust Camshaft
Crow Cams Ford Barra 2002–2005 BA/early BF Standard Replacement Exhaust Camshaft
A standard replacement exhaust camshaft for the specified Barra engine generation.
Camshaft specifications
| Supplier part number | 3240000 |
|---|---|
| Engine application | Ford BA, 2002–2005 Barra DOHC |
| Camshaft type | Hydraulic DOHC, standard replacement |
| Camshaft supplied | Exhaust camshaft only |
| Supplier RPM range | 1000–5000 rpm |
| Duration @ .050 in — inlet / exhaust | 180° |
| Valve lift — inlet / exhaust | .430 in |
| Lobe separation angle | VCT — no fixed LSA specified |
Application and fitment
Ford BA, 2002–2005 Barra DOHC. Confirm the exact camshaft and VCT arrangement. Inlet and exhaust positions are not interchangeable.
Supplied contents
- One camshaft, part number 3240000.
Only the stated components are included. Valve-train kits and other camshaft positions are separate purchases unless expressly included in the selected supplier package.
Installation and configuration
- Confirm the exact BA/BF/FG/FG-X engine, inlet/exhaust camshaft identity and VCT hardware before installation.
- Measure valve-to-piston, spring coil-bind, retainer-to-seal and other valvetrain clearances on the actual engine.
- Check hydraulic lash-adjuster preload, timing-chain and cam-gear condition, and verify the camshaft timing and ECU calibration.
- The inlet and exhaust camshafts are separate purchases. A turbo inlet profile must not be substituted for the normally aspirated inlet merely because the part numbers are similar.
- The supplier does not require upgraded springs solely for this standard profile, provided the existing springs meet the applicable service specifications.
Associated products and selection
- Recommended: Crow Cams Ford Barra 2002–2005 BA/early BF Standard Replacement Inlet Camshaft — Matching standard replacement camshaft for the same engine generation.
- Recommended: Crow Cams Ford Barra Hydraulic Lash Adjusters — Set of 24 — Standard hydraulic lash-adjuster set; confirm replacement is required.
- Optional: Crow Cams Ford Barra Valve Spring Removal Tool — SRT-BARRA — Spring-removal service tool.
- Optional: Crow Cams Ford Barra Beehive Valve Springs — Set of 24 — Supplier-listed optional spring upgrade; confirm actual application.
BBT product selection and workshop support
Built by Boost & Tune is an authorised Crow Cams dealer and performance engine workshop. We can assist with camshaft selection, matching valve-train components, installation and calibration. Provide the exact engine code, cylinder-head and cam-drive configuration, intended use and existing components when requesting a complete package.
Product System
- Engine Parts
Vehicle Fitment
- Ford Falcon Ba Bf Barra
Confirm chassis, engine, drivetrain and production-year compatibility before ordering.
Built by Boost & Tune Support
BBT can assist with fitment review, installation, supporting modifications, configuration and calibration requirements where applicable.