CP Pistons CA18DET

$1,430.00

Piston Options

CP Pistons for CA18DET Engines

Available in:

Bore: 83mm (STD) / Comp: 8.5:1 - Part#: SC7345
Bore: 83.5mm (+0.5mm) / Comp: 8.5:1 - Part#: SC7346
Bore: 84mm (+1mm) / Comp: 8.5:1 - Part#: SC7347
Bore: 84.5mm (+1.5mm) / Comp: 8.5:1 - Part#: SC7348
Bore: 83mm (STD) / Comp: 9.0:1 - Part#: SC7349
Bore: 83.5mm (+0.5mm) / Comp: 9.0:1 - Part#: SC7350
Bore: 84mm (+1mm) / Comp: 9.0:1 - Part#: SC7351
Bore: 84.5mm (+1.5mm) / Comp: 9.0:1 - Part#: SC7352

STD bore size pistons are not recommended in a used bore for any performance engine unless the bores have done minimal work with minimal wear and the correct piston to bore clearance can be adhered to.

All piston manufacturers have a specific piston to bore clearance that they recommend. If STD bore pistons are requested and there is a piston to bore clearance issue we will not exchange or refund, due to the reasons given above.

Available options

Piston Options: Bore: 83mm (STD) / Comp: 8.5:1 - Part#: SC7345 (Special Order); Bore: 83.5mm (+0.5mm) / Comp: 8.5:1 - Part#: SC7346; Bore: 84mm (+1mm) / Comp: 8.5:1 - Part#: SC7347; Bore: 84.5mm (+1.5mm) / Comp: 8.5:1 - Part#: SC7348 Special Order; Bore: 83mm (STD) / Comp: 9.0:1 - Part#: SC7349 Special Order; Bore: 83.5mm (+0.5mm) / Comp: 9.0:1 - Part#: SC7350; Bore: 84mm (+1mm) / Comp: 9.0:1 - Part#: SC7351; Bore: 84.5mm (+1.5mm) / Comp: 9.0:1 - Part#: SC7352 (Special Order)

Engine build fitment

CA18. Match the selected dimensions, engine generation and rotating assembly specification before machining or assembly.

Installation and BBT workshop support

Confirm finished bore size, piston-to-wall clearance, compression height, pin specification, ring gaps and valve clearance against the supplied piston documentation.

Built by Boost & Tune is an authorised Spool Imports dealer and can assist with component selection, engine assembly and tuning requirements for your build.