Name: Crow Cams Ford Barra Inlet Camshaft 208° / .471 in (Naturally aspirated)
Brand: Crow Cams
SKU: '3232590
Price: 665.96 AUD
Availability: InStock

Crow Cams Ford Barra inlet camshaft; supplier representative photograph

Crow Cams Ford Barra Inlet Camshaft 208° / .471 in (Naturally aspirated)

$665.96

Mild performance street profile with upper-range improvement. Correct camshaft position must be selected.

Camshaft specifications

Supplier part number	3232590
Engine application	BA–FG Barra DOHC; verify exact generation and VCT configuration.
Camshaft type	Hydraulic DOHC
Camshaft supplied	Inlet camshaft only
Supplier RPM range	2800–6500 rpm
Advertised duration — inlet / exhaust	262°
Duration @ .050 in — inlet / exhaust	208°
Valve lift — inlet / exhaust	.471 in
Lobe separation angle	VCT — no fixed LSA specified

Application and fitment

BA–FG Barra DOHC; verify exact generation and VCT configuration.

Supplied contents

One camshaft, part number 3232590.

Only the stated components are included. Valve-train kits and other camshaft positions are separate purchases unless expressly included in the selected supplier package.

Installation and configuration

Confirm the exact BA/BF/FG/FG-X engine, inlet/exhaust camshaft identity and VCT hardware before installation.
Measure valve-to-piston, spring coil-bind, retainer-to-seal and other valvetrain clearances on the actual engine.
Check hydraulic lash-adjuster preload, timing-chain and cam-gear condition, and verify the camshaft timing and ECU calibration.
The inlet and exhaust camshafts are separate purchases. A turbo inlet profile must not be substituted for the normally aspirated inlet merely because the part numbers are similar.
The supplier lists standard springs for this mild profile subject to condition and clearance checks. Confirm the correct tune and any application-specific exhaust or converter requirements.

Associated products and selection

Recommended: Crow Cams Ford Barra Hydraulic Lash Adjusters — Set of 24 — Standard hydraulic lash-adjuster set; confirm replacement is necessary.
Optional: Crow Cams Ford Barra Valve Spring Removal Tool — SRT-BARRA — Service tool for compatible Barra spring work.
Optional: Crow Cams Ford Barra Beehive Valve Springs — Set of 24 — Supplier-listed spring upgrade; verify actual spring requirement.
Recommended: Crow Cams Ford Barra Exhaust Camshaft 208° / .471 in (Naturally aspirated and turbocharged) — Matching exhaust camshaft for the same supplier profile family. Select the correct engine configuration.

BBT product selection and workshop support

Built by Boost & Tune is an authorised Crow Cams dealer and performance engine workshop. We can assist with camshaft selection, matching valve-train components, installation and calibration. Provide the exact engine code, cylinder-head and cam-drive configuration, intended use and existing components when requesting a complete package.