Crow Cams Ford Falcon BA/BF Boss 290kw - Set
Crow Cams Ford Falcon BA/BF Boss 290kw - Set
Crow Cams BAF290GTP/X is a four-camshaft engine set for the Ford Falcon BA/BF Boss 290 kW engine only. Lumpy idle and mid-to-upper engine-speed performance.
Camshaft specifications
| Supplier part number | BAF290GTP/X |
|---|---|
| Application | Ford Falcon BA/BF Boss 290 kW engine only |
| Operating range | 2900–6900 rpm |
| Advertised duration — inlet / exhaust | 260° / 260° |
| Duration at 0.050 inch — inlet / exhaust | 200° / 214° |
| Valve lift at 1.79 rocker ratio — inlet / exhaust | 0.508 / 0.475 inch |
| Lobe separation angle | 114° |
| Lash specification | Hydraulic / hydraulic |
Supplied contents
| RH inlet | 270GTP |
|---|---|
| LH inlet | 271GTP |
| RH exhaust | 272GTPX |
| LH exhaust | 273GTPX |
Four camshafts are supplied. Crow identifies RH as the driver side and LH as the passenger side. Springs, retainers, sprocket hardware and other supporting parts are separate.
Supporting parts and setup
The RH exhaust cam requires ARP 256-1001 to match its thread. Headers, suitable catalytic converters and ECU calibration are required; a vernier gear set may also be needed.
Performance valve springs are required. Crow recommends 1809-32 springs and 10705-32 chrome-moly retainers for the 290 kW application.
Contact BBT for the listed companion parts and the correct timing hardware for your engine.
Installation and BBT support
Have the installer verify cam timing, piston-to-valve clearance, spring pressures, coil-bind clearance and retainer-to-seal clearance on the actual engine. BBT can help select the supporting parts and arrange installation and calibration.
Product System
- Engine Parts
Vehicle Fitment
- Ford Falcon Ba Bf Boss 5 4
Confirm chassis, engine, drivetrain and production-year compatibility before ordering.