Harrop VE–VF MAF to MAFless Conversion Kit

Overview

Harrop VE–VF MAF to MAFless Conversion Kit contains the components required to convert a compatible VE / VF Commodore fitted with a Harrop Over-the-Radiator cold-air intake from a MAF-based arrangement to MAFless operation.

Application

This kit is specifically associated with Harrop OTR cold-air-intake installations on supported VE / VF Commodore applications. It should not be treated as a generic MAF-delete kit for unrelated intake systems.

Calibration Requirement

MAFless operation changes the engine-management strategy. The ECU calibration must be configured appropriately before the vehicle is operated in the converted arrangement. BBT recommends confirming the existing tune and complete intake / engine combination before installation.

Installation Notes

Check intake hardware, sensor arrangement, wiring and the current calibration before removing the MAF-based configuration.

Supplier Part Number

99-AKIT11960

Supplier

Harrop Engineering

BBT Support

Built by Boost & Tune can supply, install and calibrate supported VE / VF Harrop induction combinations.