Mitsubishi Lancer Evolution X 4B11T Fuel Injector Sets

Application and injector fitment

Mitsubishi Lancer Evolution X / Evo 10 4B11T applications.

Injector selection

Select the required injector family and flow rate from the product dropdown. Each choice must be calibrated using the data for that exact injector and the fuel pressure used in the vehicle.

Connector, length and O-ring check

A current Xspurt 1000 application uses a 55 mm three-quarter-length body and 14 mm top O-ring and requires a wiring connector change. Current XS Evo X sets are supplied with application-specific wiring adaptors.

Use the Suggested fitment parts selector only where the chosen injector requires a wiring adaptor, connector, extension or spacer. Do not add hardware already included with a direct-fit application kit.

Installation and calibration

Professional installation is recommended. After changing injector flow rate, the ECU calibration must be updated for injector flow, dead time/latency, fuel pressure and fuel type.

Boost & Tune support

Boost & Tune can assist with injector selection, supporting fuel-system components, installation and calibration.