JDY Performance 1000hp Engine Bottom End Kit for Audi 25TFSI - RS3 8V/

JDY Performance 1000hp Engine Bottom End Kit for Audi 25TFSI - RS3 8V/8Y, TTRS 8S, RSQ3 F3.

$5,999.00

DAZA/DNWA: Audi RS3 8V/8Y, Audi TTRS 8S, Audi RSQ3 F3

The Ultimate block-building combo for DAZA/DNWA, this kit includes everything you need to build the engine block for up to 1000hp.

Including:

JDY Performance I-Beam Conrod with ARP2000 Bolts

JDY Performance I-Beam steel connecting rods 2.5L TFSI engines with chain (EA855) are designed for an extreme performance (200HP/Per CYL). This will increase the performance of your Audi TTRS/RS3.

In order to optimally lubricate the piston pins and protect the engine parts from abrasion, the connecting rods come with an additional drilling, All JDY connecting rods are precisely angled and tested. Included are of course 3/8" ARP 2000 expansion bolts and the assembly paste. There are a few things to keep in mind during assembly, so we've summarized some information onhow to tighten the connecting rod bolts correctlyfor you!

-Diamond Pistons

The Audi 2.5L TFSI TT-RS pistons are made by Diamond Racing USA. They are built as tough as can be to withstand the vigorous demands of racing. No matter how much boost pressure you are running or how high you are revving, these pistons will take it and ask for more! Check the individual features for your application below.

Product Features and Design

2618 Low-silicon / High expansion alloy for High HP/Boost applications
Round skirt design with a bottom reinforcing band
3D under-crown milling to ensure minimal weight without compromising strength.
3D milling on piston crowns for ready-to-install finish
Oversize valve pockets for larger than stock valves and clip cuts on the edge of the pistons
Window milling reduces the piston's overall weight while maintaining its strength and structural integrity
Lateral gas ports for better ring seal
Offset pins for quiet operation
Molly Skirt coating for friction minimization and skirt wear protection
Premium 8620 series pins from 1018 mild steel

Note:The nuts and washers included in this kit still utilize premium grade 8740 alloy as only the stud is subjected to increased pressure Each kit includes a complete set of L19 head studs, nuts, and ARP Assembly Lubricant.

- ARP CA625 Custom Edge Steel 10mm Head studs

-ACL Connecting Rod & Crank Bearings