Yella Terra High-Flow Brushless Water-to-Air Intercooler Pump 35 L/min — SC 1504HF
$338.00
Skip to product information
Yella Terra High-Flow Brushless Water-to-Air Intercooler Pump 35 L/min — SC 1504HF
$338.00
The Yella Terra SC 1504HF is the higher-flow brushless pump option for demanding water-to-air intercooler systems. It uses a magnetically driven design without brushes or a conventional shaft seal and is supplied with the mounting and wiring hardware required for installation.
High-flow specification
- Operating voltage: 6–15 V DC.
- Maximum current draw: approximately 4.6 A.
- Maximum flow rate: approximately 35 L/min.
- Rated flow: approximately 33 L/min.
- Maximum head pressure: approximately 0.85 bar / 12.32 psi.
- Maximum head: approximately 8.5 m.
- Coolant temperature range: approximately -40°C to 120°C.
- PPS / Nylon 66 construction.
- Burst pressure: approximately 252 kPa / 38 psi.
- 19 mm / 3/4-inch push-on hose barb; step adaptor can be used for 12–16 mm hose where appropriate.
Included
- High-flow intercooler pump.
- Mounting bracket.
- AMP-style wiring loom.
System selection: Match pump capacity to the intercooler core, front heat exchanger, hose diameter and total circuit restriction. Higher nominal pump flow does not remove the need for correct circuit design.
Supplier
Yella Terra
Product System
- Intercooler
- Turbo & Forced Induction
Supplier Part Number
SC 1504HF
Built by Boost & Tune Support
BBT can assist with fitment review, installation, supporting modifications, configuration and calibration requirements where applicable.